Traducción de arc welding en Español:

arc welding

soldadura por arco, n.

nombre

  • 1

    soldadura por arco femenino
    • The body is assembled using a variety of techniques, including arc welding, spot welding, and self-piercing rivets.
    • Shielded metal arc welding can be used to weld a wide range of thickness of copper alloys.
    • Preheat requirements would be similar to gas metal arc welding.
    • For shielded metal arc welding, there are two basic types of electrode coatings.
    • All the welders were engaged in shielded manual metal arc welding.
    • In some cases the gas tungsten arc welding or plasma hot wire process is used.
    • This effect is minimized with gas metal arc welding because of the higher welding speed utilized.
    • This is compared to a current density of only 104 watts per square centimeter for arc welding.
    • For example, submerged arc welding is widely used for building up the surface of worn parts.
    • Tungsten arc welding, using inert shielding gases, is hardly a new process.
    • This same caution applies to automatic flux-cored arc welding or gas metal arc welding.
    • The covered electrodes are the most popular type of filler metal used in arc welding.
    • The welding processes most commonly employed today include gas welding, arc welding, and resistance welding.
    • Traditional gas metal arc welding was a very time-consuming process and created quite a lot of repair and scrap.
    • For instance, Trivedi points out that a towering metal sculpture designed by Pablo Picasso wouldn't be possible without arc welding.
    • Submerged arc welding would not normally be used on free-machining steels.
    • Gas-metal arc welding is used to join titanium and titanium alloys more than 3 mm thick.
    • Traditional arc welding has the advantage of being inexpensive, but it's tricky to control.
    • Nacey explains that in order for there to be fast, good, arc welding, it's necessary to have coordinated control of the wire feed speed, pulse waveform, and robot movement.
    • The equipment required is identical to that required for shielded metal arc welding.