In English, many things are named after a particular country – but have you ever wondered what those things are called in those countries?
1cámara de combustión femenino
- This furnace differed from the previous one in that it did not rely upon the air surrounding the furnace for the air required by its combustion chamber.
- The downside is that tiny amounts of oil can force their way up past the piston ring into the combustion chamber.
- Fuel is injected into the combustion chamber through a six-hole injector nozzle, with high-precision solenoid valve control guaranteeing exact measurement and delivery of fuel, as well as precise injection timing.
- ‘Essentially, we began with an optimized combustion chamber, then designed the rest of the engine to complement that,’ he notes.
- Their subject of focus is the instabilities created when air and liquid mix under pressure - as in the combustion chamber of a diesel motor or rocket engine.
- The intake turbine compresses the air (with the pressure measured by a sensor) and feeds it to the combustion chamber of the engine.
- Rather, features like high pressure turbocharging and common rail fuel injection are imposing higher loads on all components, and especially the crankshaft and the combustion chamber.
- In a typical gasoline internal-combustion engine, fuel enters the combustion chamber when an inlet valve opens.
- To make 7,000 horsepower, the air/fuel ratio going into the combustion chamber of a nitro fuel engine is phenomenal.
- Carbon deposits holding the valves open can cause cold no-start/hard-start complaints, suggesting these engines will benefit from a combustion chamber cleaning.
- In these systems, a liquid-to-air heat exchanger replaces the conventional combustion chamber in oil and gas furnaces, or electric resistance heating elements in electric furnaces.
- As the engine load increases, the head tilts by up to four degrees in order to lower the effective compression ratio by altering the volume of the combustion chamber with the piston at top dead center.
- Some older combination boilers or furnaces use a single combustion chamber for both fuels.
- Timing belts synchronize the action of the pistons and valves in the combustion chamber, preventing them from occupying the same space at the same time.
- The re-trial demonstrated that gas phase combustion problems resulting from low residence times within the combustion chamber and other factors could be considerably reduced by increasing furnace gas temperature and turbulence.
- The hydrogen can then be mixed in the vehicle combustion chamber with gasoline.
- The combustion chamber of a four-stroke engine is designed to induce turbulence through the addition of ‘squish’ areas in which the top of the piston is the mirror image of a corresponding area of the cylinder head.
- In general, check the flame in the furnace combustion chamber at the beginning of the heating season.
- A lot depends on the type of chamber you have and how efficient it can be, so it goes back to designing the combustion chamber to handle higher compression ratios without adversely affecting emissions.
- Also, the combustion chamber in the rotary engine is larger, which facilitates a better burn of the fuel.
English has borrowed many of the following foreign expressions of parting, so you’ve probably encountered some of these ways to say goodbye in other languages.
Many words formed by the addition of the suffix –ster are now obsolete - which ones are due a resurgence?
As their breed names often attest, dogs are a truly international bunch. Let’s take a look at 12 different dog breed names and their backstories.