Translation of circular saw in Spanish:

circular saw

sierra circular, n.

noun

  • 1

    sierra circular feminine
    • Clamp a straightedge to the door to guide a circular saw along your cut line.
    • Though you can use hand tools to cut through a roof, a circular saw or a reciprocating saw is easier and faster.
    • It could potentially boost the safety of all power saws, including band saws and circular saws.
    • The casualty toll is enough to make you wince: there were 2,506 accidents involving electric drills, 1,920 involving circular saws and 622 involving chainsaws last year.
    • Cut along the line with your circular saw at its maximum depth, then rotate the timber one time to expose the adjacent face.
    • A circular saw is the most basic of woodworking tools.
    • The cement board is cut to fit the plywood, using a circular saw equipped with the appropriate blade.
    • Generally, use a handsaw or a circular saw to cut straight lines, a coping saw or a portable jigsaw to cut irregular lines.
    • The project requires only straight cuts made with a circular saw, takes about three days to complete, and costs about $500.
    • Also, be sure you wear eye and ear protection when cutting it with a chop saw or circular saw.
    • A portable circular saw is the tool to use when you need to shorten a door to fit an existing opening or to accommodate a new layer of thick carpeting.
    • Most cuts can be made with a circular saw, handsaw, or saber saw, but the angled back support would be more easily cut with a table saw.
    • He is now suffering from hearing loss and believes that working alongside loud circular saws with no ear protection is responsible.
    • Do not use a circular saw to make this unsupported cut.
    • Using a table saw or circular saw, cut the board to length.
    • Here's a fast, foolproof way to make perfectly square, 90-degree crosscuts with a circular saw.
    • Make your pencil lines and cut on the back of the panel to avoid splintering the veneer with your circular saw.
    • The door is made with simple but strong half-lap joints, using just a few basic hand tools and a circular saw.
    • If you do a lot of plywood cutting with a circular saw you might also invest in a commercial straightedge.
    • Use a circular saw with a composition metal-cutting blade to cut them to size.